| 1 | Categories of Product Definition |
| 2 | Format of the Start section in the ASCII Form |
| 3 | Format of the Directory Entry (DE) Section in the ASCII Form |
| 4 | Format of the Parameter Data (PD) section in the ASCII Form |
| 5 | Format of the Terminate section in the ASCII Form |
| 6 | General file structure in the Compressed ASCII Format |
| 7 | Multiple Transformation Cases |
| 8 | Interpretation of ZT Displacement (Depth) for Annotation Entities |
| 9 | Entity Usage According to System Category. |
| 10 | Subfigure Structures |
| 11 | General Connectivity Pointer Diagram |
| 12 | External Linkages |
| 13 | Finite Element Modeling File Structure |
| 14 | Finite Element Modeling Logical Structure |
| 15 | Examples Defined Using the Circular Arc Entity |
| 16 | Parameterization of the Composite Curve |
| 17 | Example Defined Using the Composite Curve Entity |
| 18 | Examples Defined Using the Conic Arc Entity |
| 19 | Examples Defined Using the Centerline Entity |
| 20 | Definition of Patterns for the Section Entity |
| 21 | Examples Defined Using the Witness Line Entity |
| 22 | Examples Defined Using the Plane Entity |
| 23 | Examples Defined Using the Line Entity |
| 24 | Parameters of the Parametric Spline Curve Entity |
| 25 | Examples Defined Using the Parametric Spline Curve Entity |
| 26 | Parameters of the Parametric Spline Surface Entity |
| 27 | Examples Defined Using the Point Entity |
| 28 | Examples Defined Using the Ruled Surface Entity |
| 29 | Parameters of the Ruled Surface Entity |
| 30 | Examples Defined Using the Surface of Revolution Entity |
| 31 | Parameters of the Surface of Revolution Entity |
| 32 | Parameters of the Tabulated Cylinder Entity |
| 33 | Example of the Transformation Matrix Coordinate Systems |
| 34 | Notation for FEM-specific Forms of the Transformation Matrix Entity |
| 35a | Definition of Shapes for the Flash Entity |
| 35b | Definition of Shapes for the Flash Entity |
| 36 | Nodal Displacement Coordinate Systems |
| 37a | Finite Element Topology Set |
| 37b | Finite Element Topology Set |
| 37c | Finite Element Topology Set |
| 37d | Finite Element Topology Set |
| 37e | Finite Element Topology Set |
| 37f | Finite Element Topology Set |
| 38 | Offset Surface in 3-D Euclidean Space |
| 39 | Parameters of the CSG Block Entity |
| 40 | Parameters of the CSG Right Angular Wedge Entity |
| 41 | Parameters of the CSG Right Circular Cylinder Entity |
| 42 | Parameters of the CSG Right Circular Cone Frustum Entity |
| 43 | Parameters of the CSG Sphere Entity |
| 44 | Parameters of the CSG Torus Entity |
| 45 | Parameters of the CSG Solid of Revolution Entity |
| 46 | Parameters of the CSG Solid of Linear Extrusion Entity |
| 47 | Parameters of the CSG Ellipsoid Entity |
| 48 | Construction of Leaders for the Angular Dimension Entity |
| 49 | Examples Defined Using the Angular Dimension Entity |
| 50 | Examples Defined Using the Diameter Dimension Entity |
| 51 | Parameters of the Flag Note Entity |
| 52 | Examples Defined Using the Flag Note Entity |
| 53 | Examples Defined Using the General Label Entity |
| 54 | General Note Font Specified by FC 17 |
| 55 | General Note Font Specified by FC 1001 |
| 56 | General Note Font Specified by FC 1002 |
| 57 | General Note Font Specified by FC 1003 |
| 58 | Examples Defined Using the General Note Entity |
| 59 | General Note Text Construction |
| 60 | General Note Example of Text Operations |
| 61 | Examples of Drafting Symbols That Exceed Text Box Height |
| 62 | Examples Defined Using the Leader Entity |
| 63 | Structure of Leaders Internal to a Dimension |
| 64 | Definition of Arrowhead Types for the Leader (Arrow) Entity |
| 65 | Examples Defined Using Form 0 of the Linear Dimension Entity |
| 66 | Examples Defined Using the Ordinate Dimension Entity |
| 67 | Examples Defined Using the Point Dimension Entity |
| 68 | Examples Defined Using the Radius Dimension Entity |
| 69 | Examples Defined Using the General Symbol Entity |
| 70 | Predefined Fill Patterns for the Sectioned Area Entity |
| 71 | Examples of Nested Definition Curves |
| 72 | Examples of Illegal Definition Curves |
| 73 | Example of Illegal Relationship for Definition Curves |
| 74 | Example of Two Ways to Define an Area |
| 75 | Relationships Between Entities in an Associativity |
| 76 | Line Font Definition Using Form Number 1 (Template Subfigure) |
| 77 | Line Font Definition Using Form Number 2 (Visible-Blank Pattern) |
| 78 | Example of a Character Definition |
| 79 | Example of a Character Definition |
| 80 | Dimensioned Geometry Associativity |
| 81 | Using Clipping Planes with a View in a Drawing |
| 82 | Parameters of the Drawing Entity |
| 83 | Measurement of the Line Widening Property Values |
| 84 | Relationship Between Properties Used to Represent a Composite Material |
| 85 | Use of the Vector D to Define the Element Material Coordinate System |
| 86 | Internal Load and Strain Sign Convention |
| 87 | Relationship Between Subfigure Definition and Subfigure Instance |
| 88 | Orthographic Parallel Projection of AB on a View Plane |
| 89 | View Coordinate System |
| 90 | Planes Defining the View Volume |
| 91 | Relationship Between the Nodal Load/Constraint Entity and Tabular Data Properties |
| A1 | Electrical Part Example |
| A2 | Mechanical Part Example |
| A3 | Drawing and View Example |
| F1 | Obsolete General Note Font specified by FC 0 |
| G1 | Finite Element Topology Set |
| G2 | Hierarchical nature of the MSBO |
| G3 | Construction of the MSBO |
| G4 | Defining data for unparameterized plane surface (Form Number = 0). |
| G5 | Defining data for parameterized plane surface (Form Number = 1). |
| G6 | Defining data for unparameterized right circular cylindrical surface (Form Number = 0). |
| G7 | Defining data for parameterized right circular cylindrical surface (Form Number = 1). |
| G8 | Defining data for unparameterized right circular conical surface (Form Number = 0). |
| G9 | Defining data for parameterized right circular conical surface (Form Number = 1). |
| G10 | Defining data for unparameterized spherical surface (Form Number = 0). |
| G11 | Defining data for parameterized spherical surface (Form Number = 1). |
| G12 | Defining data for unparameterized toroidal surface (Form Number = 0). |
| G13 | Defining data for parameterized toroidal surface (Form Number = 1). |
| G14 | Examples Defined Using the Curve Dimension Entity |
| G15 | General Note Font (OCR-B) Specified by FC 19 |
| G16 | Text Containment Area |
| G17 | Character Height, Inter-line Spacing |
| G18 | Character Width, Interspace, Box Width |
| G19 | Examples of Fixed Width Character Interspace |
| G20 | Rotation, Slant and Character Angle |
| G21 | Text Containment Area |
| G22 | Character Height, Width, Interspace, Box Width |
| G23 | Character Height, Width, Interspace, Box Width |
| G24 | Example Defined Using the Ordinate Dimension Entity |
| G25 | Example Defined Using the Radius Dimension Entity |
| G26 | Examples of Symbols Defined Using New Form Numbers of the General Symbol Entity |
| G27a | Predefined Fill Patterns for the Sectioned Area Entity |
| G27b | Predefined Fill Patterns for the Sectioned Area Entity |
| G27c | Predefined Fill Patterns for the Sectioned Area Entity |
| G28a | Examples of Standard and Inverted Crosshatching. |
| G28b | Examples of Standard and Inverted Crosshatching. |
| G28c | Examples of Standard and Inverted Crosshatching. |
| G29 | Parameters of the Isoceles Triangle Macro in Example 1 in Text |
| G30 | Repeated Parallelograms Created by Macro Example 2 in Text |
| G31 | Concentric Circles Created by Macro Example 3 in Text |
| G32 | Ground Symbol Created by Macro Example 4 in Text |
| G33 | Use of DOF with Angular Dimensions. |
| G34 | Use of DOF with Linear and Ordinate Dimensions. |
| G35 | Use of DLF. |
| G36a | Illustrations of Line Font Patterns for Different Values of LFPC |
| G36b | Illustrations of Line Font Patterns for Different Values of LFPC |
| G37 | Examples of tolerance formats (UTOL = 0.01, LTOL = -0.02) |
| G38 | Placement of Text Using TP and TL. |
| G39 | Definition of a Perspective View |
| I40 | Format of the Control Byte Used in the Binary Form |
| I41 | Format of an Integer Number in the Binary Form |
| I42 | Format of a Real Number in the Binary Form |
| I43 | Structure of a String Constant in the Binary Form |
| I44 | General File Structure in the Binary Form |
| I45 | Format of the Binary Flag Section in the Binary Form |
| I46 | Format of the Start Section in the Binary Form |
| I47 | Format of the Global Section in the Binary Form |
| I48 | Format of the Directory Entry (DE) Section in the Binary Form |
| I49 | Format of the Parameter Data (PD) Section in the Binary Form |
| I50 | Format of the Terminate Section in the Binary Form |
